|
|
Nedap AEOS Security Management
AEOS solutions have been designed to integrate all forms of identification into a single security management system. Within the same system, Nedap hands-free technology for employees can be combined with bar-code badges, card technologies such as Mifare® or HID® and Nedap microwave identification technology.
The Nedap AEOS system provides a high level level of integration with biometric systems and also a user platform for enrolment and verification of the biometric parameters. Integration in AEOS means that all advantages of AEOS with respect to storage and backup of data and multi site functionality are also available for the biometric ID.
|
PDF
|
|
|
|
Nedap AEOS Software
AEOS is a powerful, user-friendly access control and security management system based on smart network technology. In AEOS, essential functionalities are configured according to the wishes of the end user by means of peer-to-peer communication and flexible and powerful behaviour components. These behaviour components can be added with a simple click of the mouse, without restrictions. The age of traditional systems, in which functionality was defined by the hardware available, is definitely over!
|
PDF
|
|
|
|
Nedap AEOS Controller AP8001
The AP8001 is the distributed intelligence of the AEOS system. In this AEOS Processing Unit(AEpu), the user defines the desired local functionality by activating behaviour components. All authorisations for the connected readers are stored in the AEpu. Each AEpu can function as a stand-alone unit or can be connected to the IP network to communicate with other AEpus and IP-based devices in the network. This can be achieved without intervention of the AEOS server, with which the connected equipment also communicates by IP.
|
PDF
|
|
|
|
Nedap AEOS 4-in-1 Reader Interface with CPU
The AP4803 combines IP-based access control with a processing unit and 4 reader interfaces,enabling up to sixteen doors to be secured (for example, using the AP1002 hands-free reader or additional AP4003 4-in-1 reader interfaces). This 4-in-1 card reader makes it possible to seamlessly
integrate virtually all current card technologies such as Barcode, HID and Mifare, with the use of Wiegand, Omron, RS232 and similar communication protocols. Existing systems can migrate to AEOS with no problem, so there is no need to replace existing cards and card readers.
|
PDF
|
|
|
|
Nedap AEOS 16 Digital Inputs Module AP3002
The AP3002 Digital Input Pack is especially designed for the integration of digital sensors, such as contacts or intruder alarms. It can be used to record digital signals for a specific area (from an intruder alarm, for example) and is therefore highly suitable for application in a comprehensive security system with a variety of components.
|
PDF
|
|
|
|
Nedap AEOS 10 Relay Outputs Module AP3004
The AP3004 Relay Output Pack allows you to expand AEOS with 10 outputs for controlling external equipment (such as signalling devices, doors, lift and barriers) incorporated in the security management system.
|
PDF
|
|
|
|
SiPass Integrated
Robust and user-friendly, the SiPass integrated software package is the heart of any SiPass integrated system. The total number of controllers that can be connected is virtually unlimited.
The Windows-certified software is built on powerful client/server architecture, and it is easy to install and administer via its graphical user interface.
In a SiPass integrated system it is also possible to set up customized interfaces to other applications in order to ensure smooth communication at all times.
|
PDF
|
|
|
|
SiPass Module-Photo ID and Image Verification
The ASE5300-ID enables the system to quickly and easily capture cardholder photographs and print a personalized access card that includes the photo for each cardholder. This ability to combine cardholder photographs with their access and personal information will strengthen any security system. Within minutes it is possible to construct a custom designed card template‚ complete with company logo‚ photograph and signature‚ plus any eye-catching graphics that may be required.
|
PDF
|
|
|
|
SiPass Reader AR618x-RX
ID - Card Reader AR618x-RX
|
PDF
|
|
|
|
SiPass Reader AR633x-RX
ID - Card Reader AR633x-CP
|
PDF
|
|
|
|
SiPass Module-Human Resources (HR) Interface
Communication with other applications is an essential feature in modern access control systems. SiPass integrated offers the possibility to set up a customized interface to other applications.
The SiPass integrated HR application programming interface (API) allows cardholder and access control data to be accessed and modified using a third-party application‚ such as a human resources system or a Web browser.
|
PDF
|
|
|
|
SiPass Module-Messaging
Providing security around the clock is a challenge for every facility. The high cost of employing security guards overnight is prohibitive‚ but the risks of potential security breaches when the site is unmanned are huge. The message forwarding option solves this problem.
The ASE5300-MF messaging software allows the system to automatically send custom text messages to pagers‚ mobile telephones or by e-mail. Using the latest telecommunication technology‚ it is possible to notify key personnel‚ who may otherwise be absent from a premises‚when security has been breached..
This allows a timely and appropriate response to any alarm situation. ASE5300-MF software can also forward alarms and messages to other SiPass integrated servers' central controlling software‚ residing on the same LAN/WAN. If a business with a SiPass integrated system is not manned‚ alarms can be automatically forwarded to a location with security operators who are monitoring SiPass based activity.
|
PDF
|
|
|
|
SiPass Module-Guard Tour
Electrical equipment provides superior surveillance‚ but if unseen by intruders it is not a good deterrent. Guards provide a highly visual security component‚ and if used correctly provide an excellent intrusion deterrent.
Guard Tour conveniently integrates your access control and security network with a state-of-the-art electronic patrol verification system. Guard Tour uses the same infrastructure as the SiPass integrated system - be it card readers or any other access or input device. There is no need to install additional equipment to monitor guard patrols‚ as it is already in place.
A guard can be tracked as he/she patrols your site. The same device used to indicate his or her position in a tour is also used to unlock doors and turn on alarm systems. This enables guards to generate real-time duress alarms‚ without arousing suspicion. Guard Tour's advanced functionality allows you to customize tours‚ assign guards to specific or random tours‚ impose time constraints‚ and generate alarms when tour conditions have been breached.
|
PDF
|
|
|
|
SiPass Mifare encoding module
Plastic ID cards are not only used for access control but also for other applications. By using the Mifare encoding option‚ access control cards with Mifare technology (such as ABP5100) can also be reprogrammed for many other applications‚ such as using the card as cashless payment for goods or food within company facilities or on a student campus.
The SiPass integrated Mifare encoding option now also provides the ability to read the profile of an entire card. By simply selecting the appropriate template and presenting a card all the contents of that card can be read and displayed on screen in seconds.
|
PDF
|
|
|
|
SiPass Module-Closed Circuit Television-CCTV
This module enables you to upgrade your SiPass integrated server to interact with a variety of CCTV systems. The settings and configurations for cameras and monitors can then be made directly from the SiPass integrated system.
The image sequences are displayed from the SiPass integrated graphical user interface (GUI). Using the event control function‚ camera sequences can be programmed‚ which can start automatically with a specific system event. Supported matrix switchers include Pacom 2030, Pelco 9760, Pelco 9740, Pelco CM6700, and Pelco CM6800.
|
PDF
|
|
|
|
SiPass Module-Graphics
The SiPass graphics option enables you to design, import, and construct custom graphic maps. These maps are then used by security operators to handle alarm conditions visually, and continually monitor the status of any point within the access control and security system.
Graphic maps are integrated with the SiPass integrated monitoring system. This ensures that when the status of any component at your facility changes, it is dynamically represented by a symbol on a graphic map. This dynamic updating of symbols, alerts the security operator to a change of condition, allowing them to respond with an appropriate and timely action.
The comprehensive suite of graphics tools provided by SiPass integrated make it possible for any facility to create its own graphic maps easily. Within minutes you can construct a map including a full layout of your facility, dynamically changing symbols that represent points within your system, and shortcuts to other maps or frequently used functions.
|
PDF
|
|
|
|
SiPass Intrusion module
The intrusion module makes it possible to use SiPass integrated both as an access control system and an intrusion detection system. When it is activated the card readers are used both for access control and to turn the intrusion system on and off. Alternatively, this module can be used to integrate a dedicated Intrunet SI410 intrusion panel into a SiPass integrated system. Existing Intrunet SI410 customers can use this module to add a fully featured access control application to their suite of building management tools.
|
PDF
|
|
|
|
SiPass Module-Digital Video Recording
The ASE5300-DV software allows the user to control and view live or recorded images from multiple digital video recording (DVR) units connected to the same network as SiPass integrated. It is possible to manage the recording and playback features of supported DVR systems with this software. .
Used in combination with the event and alarm handling functionality in SiPass integrated‚ it is possible to trigger immediate recording from DVR cameras in response to alarms or any other system event.
|
PDF
|
|
|
|
SiPass Visitor management module
The modern office building is a complex affair. Personnel are often a mixture of permanent‚ contract and casual employees‚ each with different access requirements. If you add visitors‚ who can stay for periods ranging from a few hours to a few months‚ your cardholder management system can quickly become overloaded with information about both permanent and non-permanent cardholders. This might lead to confusion and inefficiencies in searching for records.
SiPass integrated addresses these problems and more with the visitor management option. With a unique user interface dedicated to capturing visitor details‚ visitor management graphically separates visitor information while offering exactly the same card encoding‚ access control and imaging features available to normal SiPass integrated cardholders. It also includes an extensive reporting facility for visitor transactions and custom data pages that can be created exclusively for visitor records.
|
PDF
|
|
|
Homepage
Contact Us
Hebrew
